Poultry shed design 10 × 60 m starting form
Lay out a long poultry-house concept with feed and drinking lines beside a central access reserve. The low, open-sided starting form keeps the equipment arrangement visible while you refine orientation, servicing and the building brief.
यह जानकारी हिंदी में पढ़ें
FURNISHED CONCEPT- Floor footprint
- 600 m²10 × 60 m width × length
- Eave height
- 3 mCheck actual underside clearance
- Bays along the length
- 10 bays6.00 m centre-to-centre
- Wall arrangement
- Open sides · no wall claddingStructural members remain at openings
See what changes the steel quantity.
The range compares 9, 10, 11 bays at the same width, length, eave, roof, openings and selected sections. It describes those modelled arrangements; it is not an engineered minimum–maximum allowance.
Concept take-off, sections not designed — run the section sizing screen
Starting 10-bay model: 15,897 kg of modelled steel.
See exact scenarios and quantity basis
| Bays | Bay spacing (m) | Model steel (kg) | kg/m² | kg/sq ft |
|---|---|---|---|---|
| 9 | 6.67 | 15,160 | 25.27 | 2.347 |
| 10starting | 6.00 | 15,897 | 26.49 | 2.461 |
| 11 | 5.45 | 16,647 | 27.74 | 2.578 |
Primary / secondary / brace sections: BSP MB 300 × 140 · MC 100 × 50 · ISA 75 × 75 × 6
End-wall framing is enabled, matching a fresh editor preset; modelled end posts are included where walls are clad. This is net frame, secondary-member and plate mass. Procurement waste, cladding, civil works, furnishings and equipment loads remain separate. No price, safe capacity or design approval is inferred.
A furnished starting layout.
The current fit-out generator places 35 physical objects in this starting model. These counts come from that generated layout.
- 1Feed / grain hopperFeed store hopper
- 12Poultry feederLeft feeder · Right feeder
- 12Poultry drinkerLeft drinker · Right drinker
- 1Storage cabinetEquipment cabinet
- 7Linear light fixtureGeneral light
- 2Extinguisher positionFire equipment position (review required)
The 2.0 m central stripe is a planning reserve, not an approved exit route or vehicle swept-path result. Equipment is generic; confirm capacity, service clearances and actual loads separately.
Questions, answered.
A closer look at the poultry shed concept, its editable inputs and the decisions that belong in a project-specific design.
What are the starting dimensions of the poultry shed?
The preset starts at 10 m wide by 60 m long, with a 3 m eave and 10 bays along its length. You can edit these dimensions. They describe a concept starting form, not an operating capacity or approved structural design.
How many birds does this poultry shed hold?
The model does not calculate bird capacity or stocking density. Choose the production system with your poultry specialist, then enter the required equipment, environmental controls and operating clearances.
Are the feeder and drinker rows real equipment specifications?
They are editable generic envelopes generated by the fit-out module. Their count and location help explain a spatial layout; they do not specify a manufacturer, feed rate, drinker capacity or flock size.
Are ventilation and curtains included?
The starting shell has open sides. Bird comfort, airflow, curtains, mesh, cooling, drainage and biosecurity measures require a separate poultry-house specification and site review.
Can I reduce the steel by using fewer poultry-shed bays?
The comparison shows how the selected sections change the model quantity when the bay count changes. It does not verify longer purlin spans, frame resistance, bracing or serviceability, so a lighter result is not a design recommendation.
Related shed concepts.
Make this starting point your own.
Adjust the dimensions, roof, enclosure and equipment layout. Keep refining the actual project brief and engineering inputs alongside the model.