A starting point for your project

Site office design 6 × 12 m starting form

Plan a compact site workspace around desks, a meeting area and everyday amenities. The mono-pitch starting shell includes independently editable furniture and entry and window assemblies.

Open this concept in 3D Explore quantities

Furnished site office 3D concept showing the frame and illustrative interior equipment — Illustrative preset preview. Current starting inputs are listed below; inspect changes in the live editor.

Floor footprint: 72 m²6 × 12 m width × length
Eave height: 3 mCheck actual underside clearance
Bays along the length: 3 bays4.00 m centre-to-centre
Wall arrangement: Enclosed perimeterStructural members remain at openings

Same footprint. Three bay arrangements.

See what changes the steel quantity.

The range compares 2, 3, 4 bays at the same width, length, eave, roof, openings and selected sections. It describes those modelled arrangements; it is not an engineered minimum–maximum allowance.

40.4–53.3kg/m² of floor footprint

3.76–4.96kg/sq ft of floor footprint

Concept take-off, sections not designed — run the section sizing screen

Starting 3-bay model: 3,352 kg of modelled steel.

See exact scenarios and quantity basis

Bays	Bay spacing (m)	Model steel (kg)	kg/m²	kg/sq ft
2	6.00	2,911	40.44	3.757
3starting	4.00	3,352	46.56	4.325
4	3.00	3,840	53.34	4.955

Primary / secondary / brace sections: BSP MB 250 × 125 · MC 75 × 40 · ISA 50 × 50 × 6

End-wall framing is enabled, matching a fresh editor preset; modelled end posts are included where walls are clad. This is net frame, secondary-member and plate mass. Procurement waste, cladding, civil works, furnishings and equipment loads remain separate. No price, safe capacity or design approval is inferred.

More than an empty shell

A furnished starting layout.

The current fit-out generator places 17 physical objects in this starting model. These counts come from that generated layout.

2
Office deskDesk
4
Office chairChair · Meeting chair
1
Storage cabinetDocument cabinet
1
Meeting tableMeeting table
1
Internal partitionPrivacy screen
1
Utility sinkPantry sink
2
Linear light fixtureGeneral light
2
Extinguisher positionFire equipment position (review required)
1
Prefab door assemblyFront entry assembly
2
Framed windowLeft wall window assembly · Right wall window assembly

The 1.2 m central stripe is a planning reserve, not an approved exit route or vehicle swept-path result. Equipment is generic; confirm capacity, service clearances and actual loads separately.

Before you build your brief

Questions, answered.

A closer look at the site office concept, its editable inputs and the decisions that belong in a project-specific design.

What are the starting dimensions of the site office?

The preset starts at 6 m wide by 12 m long, with a 3 m eave and 3 bays along its length. You can edit these dimensions. They describe a concept starting form, not an operating capacity or approved structural design.

Does this site office come with a room plan?

The generated fit-out shows desks, chairs, a meeting table, a privacy screen and pantry sink. It is a furniture arrangement; room separation, sanitation, occupancy and building services still need a project layout.

Can I change the site-office windows?

Generated windows are linked to their wall openings in the editor. Moving or resizing an assembly updates its opening, but the cutout does not redesign girts, braces or opening supports.

Is the office insulated or air-conditioned?

No thermal or ventilation performance follows from the appearance of the model. Specify the wall and roof build-up, glazing, shading, indoor conditions and services separately.

Can I use this as a portable cabin design?

It is a steel-shell concept, not a transportable cabin certification or lifting design. Transportation, lifting points, anchorage, modular joints and local permissions require a separate brief.

Explore another starting point

View all 20 concepts